2022 Schwarze Street Sweepers GS6 Tempest (International) Base
- Year 2022
- Make Schwarze Street Sweepers
- Model GS6 Tempest (International)
- Engine 4045HF285
2022 Schwarze Street Sweepers GS6 Tempest (International) Base
2022 Schwarze Street Sweepers GS6 Tempest (International)
6.0 Cubic Meter Regenerative Air SweeperThe Schwarze® GS6 Tempest™ is a heavy-duty, chassis mounted, regenerative air street sweeper with a 6.0 m3 hopper. The GS6 Tempest™ has over 25 years of successful operation around the world. From a hydraulic system designed with just-in-time principles to insure clean, fresh fittings to a blower system that generates a high velocity air column over 17,000 CFM, the Tempest™ is designed to work more and be down for maintenance less. The GS6 Tempest™ is a heavy-duty workhorse that will provide a high quality option with a low cost of ownership. Come to the people you know, for the products you trust.
Engine
Engine
4045HF285
Aspiration
Turbo-charged
Engine Manufacturer
John Deere
Displacement
4.5 l (275 cu. in)
Engine Power
86 kW (115 hp) @ 2400 rpm
Engine Torque
430 nm (317 ft. lb.) @1500 rpm
Air Cleaner
Dual element dry type w/centrifugal pre-cleaner & restriction indicator
Fuel System
Fuel Type
disel
Drivetrain
Drive System
BLOWER SYSTEM: Direct via 5 single power belts | SIDE BROOMS: Hydraulic | HYDRAULIC SYSTEM: Direct gear
Suspension
Suspension
PICKUP HEAD: Adjustable spring balanced | SIDE BROOMS: Torque-sensing sprin
Electric
Electric Start
12 v
Alternator
75 amp
Operational
Top Speed
Variable; non-reversing
Hydraulics
Oil Filter
Full-flow/spin-on
Hydraulic Pump
Run Dry Diaphragm | 24.6 l/min @ 1800 rpm (6.9 gpm)
Maximum Pressure
173 bar (2500 psi)
Dimensions
Dimensions
SIDE BROOMS: 990 mm (39 in) | Head area: 12903 cm2 (2000 sq. in) | Hose construction: 9.5 mm (3/8 in) wire-reinforced molded rubber | Hose diameter: 355.6 mm (14 in) | BLOWER SYSTEM: 832 mm x 127 mm (32.75 in x 5 in) | Fill hose: 7620 mm (25 ft) | Fill diameter: 63.5 mm (2.5 in) | Floor angle: 3°|Dump angle: 46° | Pickup head only: 2032 mm (80 in) | Pickup head and one gutter broom: 2717 mm (107 in) | Pickup head and two gutter brooms: 3404 mm (134 in)
Length
PICKUP HEAD: 2032 mm (80 in)
Volume
6 cu. m (7.8 cu. y) | Usable: 4.97 cu. m (6.5 cu. y)
Capacities
Features
DUST CONTROL SYSTEM: 946 l (250 gal) | Reservoir: 94 l (22.5 gal)
Lights and Safety
Safety Features
Prop: Dual steel tubes | shutdown: Three-point automatic
Features
Features
Function: Raise/lower hopper; open/close hopper door; raise/lower brooms and pickup head | AUXILIARY HYDRAULIC SYSTEM Type: Gear type; driven by electric motor | HYDRAULIC SYSTEM Controls: Electro-hydraulic | HYDRAULIC SYSTEM Protection: Pressure relief valve | Filter: 6 micron; spin on | HYDRAULIC SYSTEM Type: Gear type | Tilt angle adjustment: In-cab controls | Segments: 4 each side; disposable | Pressure: Manual | Wear adjustment: Automatic | Location: Right; left; forward of pickup head | SIDE BROOMS Type: Vertical steel digger | Front flap: Hydraulic open and close | Operating direction: Forward and reverse | PICKUP HEAD Type: Dual chambered full-width blast orifice | Mounting: Double sealed bearing spindle | Housing lining: Bolt-in corded rubber | BLOWER SYSTEM Type: Closed-face radial | Nozzles: 2 on each broom; 2 inside transition tube; 1 inside suction nozzle; | Controls: Electric; in-cab | Throttle control: Electronic | Sweeper: Load weight warning Hopper up indicator Hydraulic level indicator | Sweeper engine: Tachometer; hourmeter; voltmeter; temperature gauge | Screens: Drop down design | Inspection doors: 1 on each side of hopper | Lifting: Twin hydraulic cylinders | Hopper dump door: open/close/lock hydraulically
Construction Material
Vacuum enhancer: For heavy/light material | BLOWER SYSTEM: Hardox steel | DUST CONTROL SYSTEM Tank: Polyethylene filter; 50 mesh; cleanable