2022 Schwarze Street Sweepers Hypervac (Pure Vacuum) Base

2022 Schwarze Street Sweepers Hypervac (Pure Vacuum) Base

Swipe to View More

  • Year 2022
  • Make Schwarze Street Sweepers
  • Model Hypervac (Pure Vacuum)
  • Engine 4045T in-line
2022 Schwarze Street Sweepers Hypervac (Pure Vacuum) Base

2022 Schwarze Street Sweepers Hypervac (Pure Vacuum) Base

2022 Schwarze Street Sweepers Hypervac (Pure Vacuum)

SCHWARZE HYPERVAC (PURE VACUUM)

When Schwarze decided to enter the highly competitive pure vacuum sweeper market, they did not want to be yet another manufacturer to provide yet another traditional pure vacuum sweeper. So Schwarze set out to change the pure vacuum sweeping technology to keep the desirable vacuum sweeper features such as the ability to remove fines from gutters and pervious pavement while overcoming some of the typical pure vacuum sweeper drawbacks such as noise, dust emissions and poor transfer broom performance. To eliminate these drawbacks Schwarze addressed some key functions in several areas with exciting new technologies. Noise is reduced by traditional absorption methods and a unique tortuous path sound attenuator. The Schwarze HyperVAC utilizes multiple fugitive dust control strategies, including water, debris deceleration through deflection, cyclonic separation, and finally the tortuous path fan noise attenuator is also a dust separator that empties when the hopper is dumped. The most radical departure from the traditional vacuum sweeper is the Patent Pending Schwarze Vertical digger broom transfer array. Schwarze Industries introduced the new revolutionary Schwarze HyperVAC pure vacuum sweeper at the PWX show in Orlando, Florida. Introducing an entirely new material transfer system and dust separation that reduces the release of contaminant air typically seen in pure vacuum sweepers.

Features may include:

  • Twin Engine Design
  • 8 Cubic Yard Hopper
  • High Strength Stainless Steel Rear Dump Hopper
  • 134 HP Cummins Auxiliary Engine Tier 4 Final
  • CAN Bus Control System
  • Full Color Sweeper Status and Information Display screen
  • 138-Inch Sweeping Swath
  • Dual Hopper Access Doors
  • Engine Access Door for Daily Maintenance
  • Whisper Wheel 30-Inch Radial Turbine Blower
  • 12-Inch Intake Tubes
  • Dual 39-Inch Gutter Brooms
  • Schwarze Exclusive Digger Broom Transfer System
  • Back Up Alarm
  • 250 Gallon water dust control system
  • Multi Stage Dust Separation System
  • Engine and Fan sound reduction System
STANDARD CHASSIS EQUIPMENT
  • 33,000 GVWR Cab Over Chassis
  • 33,000 GVWR Conventional Chassis
  • 5-Speed AutomaticTransmission
  • AM/FM/USB Stereo
  • Rear Vision Camera System
  • Air Conditioned Cab
  • Power Windows
  • Power Door Locks
  • Tilt Steering Column
  • Cruise Control

Engine

Engine 4045T in-line
Cylinder Liners 4 cylinder
Aspiration Tier/Stage 4 turbo-charged
Engine Manufacturer John Deere
Displacement 275cu in (4.5 L) Brake
Engine Power 134hp (10 kw) @ 2400 rpm
Engine Torque 398ft lb (540 Nm) @1600 rpm
Air Cleaner Centrifugal precleaner; dry type with safety element and restriction indicator
Stroke 5 in (127 mm)
Bore 4.20 in (106 mm)
Compression Ratio 19 to 1

Fuel System

Fuel Type disel

Drivetrain

Drive System HYDRAULIC SYSTEM: Belt |FAN SYSTEM: Direct via 5 groove; banded power belt | SIDE BROOMS: Hydraulic |TRANSFER SCRUBBING BROOMS: Hydraulic

Suspension

Suspension SUCTION NOZZLES: Caster wheel |SIDE BROOMS: Air float | TRANSFER SCRUBBING BROOMS: Air float

Electric

Electric Start 12 V
Alternator 90 amp

Operational

Top Speed Variable; non-reversing

Hydraulics

Oil Filter Full-flow/spin-on
Hydraulic Pump 34 gpm 129 lpm @ 2200 rpm
Maximum Pressure 2750 psi (190 bar)

Dimensions

Dimensions Floor angle: 3 degrees | Dump angle: 46 degrees | TRANSFER SCRUBBING BROOMS: 28" | SIDE BROOMS: 39” (1118 mm) | Reach: 8” (200mm) beyond tire | Suction hose diameter: 12” (305 mm) | Nozzle area: 250 sq in (2032 mm) | Fill hose: 25 ft (7620 mm) | Fill diameter: 2.5 in (63.5 mm) | Suction nozzle only: 28 in. (813 mm) | Suction nozzle, transfer brooms and one side broom: 108 in. (2743 mm) | Dual suction nozzles, dual side brooms and transfer brooms: 138 in. (3505 mm)
Fan Diameter 32.75 in (832 mm) Housing lining Bolt-in corded rubber
Height Hopper Dump: 45 in (1143 mm)

Capacities

Volume 8.4 cu yd (6.4.cu m) | Usable: 7.0 cu yd (5.4 cu m)
Features DUST SUPPRESSION SYSTEM: 380 gal (1438 L) | Reservoir: 42 gal (158 L)

Lights and Safety

Safety Features props: Dual steel bars under body | shutdown: Three-point automatic

Features

Features Function: Lower hopper; open/close hopper door; raise brooms & pickup head | AUXILIARY HYDRAULIC SYSTEM Type: Gear type; driven by 12v electric motor |HYDRAULIC SYSTEM Controls: Electro-hydraulic | Filter: 10 micron; in-tank pressure relief valve |HYDRAULIC SYSTEM Type: Variable displacement |Debris screens: Drop down for cleaning | Inspection doors: 1 on each side | Hopper dump door: Hydraulic open, close, lock | Lifting: Twin hydraulic cylinders | Lift: Air cylinder | TRANSFER SCRUBBING BROOMS Wear adjustment: Automatic | TRANSFER SCRUBBING BROOMS Type: Vertical Steel digger | Tilt angle adjustment: In-cab controls | Segments: 4 per side; disposable | Pressure: In-cab pneumatic adjustable | Wear adjustment: Automatic | SIDE BROOMS Location: Right; left; forward of pickup head | SIDE BROOMS Type: Vertical steel digger | SUCTION NOZZLES Controls: Pneumatic raise and lower | Leaf/litter door: Pneumatic with adjustable timer | Operating direction: Forward with lift in reverse | SUCTION NOZZLES Type: Tow bar | Mounting: 2 regreaseable sealed bearings | Balance: 1.5 g on 2 sides | FAN SYSTEM Type: Closed-face radial | Water level gauge: In-cab | Controls: Electric; in-cab | Filter: 50 mesh; cleanable | DUST SUPPRESSION SYSTEM Type: Dual positive displacement diaphragms | Throttle control: Electronic | Auxiliary engine: Flat panel display; tachometer; hourmeter; voltmeter; temperature gauge; oil pressure gauge; warning icons
Construction Material SUCTION NOZZLES: Abrasion-resistant steel with corded rubber seal flaps. | SUCTION NOZZLES Hose: Wire-reinforced, 3/8” (9.5mm) thick molded rubber | FAN SYSTEM: Hardox stee | SWEEPER BODY: Welded 10-gauge stainless steel plate |DUST SUPPRESSION SYSTEM: Polyethylene
Knife Quantity 3

Product Photography